fully radiolucent patient monitoring kitsfor long-term and ICU use
CLARAVUE is an efficient and hygienic solution for simple, accurate and fully radiotransparent patient monitoring. CLARAVUE includes prewired disposable electrodes for use with patented reusable trunk cables.
For the past ten years, CLARAVUE has been known to provide very good trace quality and infection prevention in prominent hospitals globally.
CLARAVUE Long Term Monitoring
Last Edited: 1/8/2020
CLARAVUE’S best-in-class electrodes reduce motion artifact associated with movement of the leadwires on electrode snaps. Repositionable, disposable patient kits can be used for up to 5-days.
CLARAVUE’S patented quick connection consolidates standard 10 leadwire ends to two simple, plug-style connections. Reduce opportunities for error by simplifying connections. Lightweight and conforming cables increase patient comfort.
A larger surface area adheres better to patient's skin especially in challenging conditions. Foam backing is sturdier and retain integrity during long-term wear. Visible backing liner prevents slipping hazard on the floor.
Each completely disposable Patient Kit ensures the most hygienic solution for infection control.
CLARAVUE comes packaged in a dispenser case designed for easy storage and efficient product retrieval. Each patient kit is a single-use pack, containing all prewired electrodes.
Standard protocol for skin prep applies.
Open the single CLARAVUE patient kit. Remove inner bag. Unwind sets from the holder card.
Gently remove electrode sets from release liner by peeling away from thumb tab.
Adhere the RA and RL electrode positions to the patient. Continue to apply set A across the patient’s chest to the LA position and down to the LL position. Repeat with set B, applying the V positions from left to right. CLARAVUE is repositionable, allowing the freedom to rearrange on the patient as necessary. Note: Gently pull the wire from the ribbon cable to expand the overall size of the set(s).
While holding the male end of the adapter (clear clip) attached to set A, align with the blue, triangular indicator. Press firmly until lever snaps. Repeat with the blue clip attached to set B.
Ensure a good signal is achieved on the monitor. If a standard three lead trace is necessary, unplug set B from the adapter cable and remove the corresponding V positions from the patient. CLARAVUE’s various lead configurations enables total hospital standardization.