![#](/globalassets/globalpics/claravue/claravue-web-header-cath-lab2.jpg)
for the EP & Cath Lab
CLARAVUE® features the only disposable, prewired patient monitoring kit — the radiolucent design provides the best-in-class for highest quality traces in Electrophysiology and Cardiology care. CLARAVUE® works with an Adapter Trunk Cable. Fully repositionable, CLARAVUE® provides a 5-day wear time. Our 12 Lead Patient Kit is perfect for patients moving from EP/Cath to Vis. Simply remove the V lead set and keep on the limb leads.
![](/globalassets/globalpics/claravue/claravue-electrodes-web.png)
CLARAVUE Cath Lab
CLARAVUE® features disposable pre-wired and pre-positioned electrodes and patented reusable bioactive trunk cables.
Last Edited: 01/04/2022
Descargar Visitar la página webClaravue Features
Invisible Wires & Electrodes
![Card image cap](/globalassets/globalpics/claravue/xray-radiolucent.png)
No image obstruction under x-ray and fluoroscopy
Invisible under x-ray and fluoroscopy, CLARAVUE’s radiolucent leadwires allow for outstanding imaging during procedures in the Catherization Lab or Electrophysiology Department. Notably, CLARAVUE’s carbon wiring of electrodes does not appear under imaging equipment.
Disposable & Hygienic
![Card image cap](/globalassets/globalpics/claravue/claravue-open-pouch.png)
Single Patient Use - Up to 5 Day Wear Time
Each completely disposable Patient Kit ensures the most hygienic solution for infection control.
Quality Trace
![Card image cap](/globalassets/globalpics/claravue/claravue-electrodes.png)
Pre-wired electrodes eliminate the need to snap leadwires onto electrodes.
CLARAVUE’S best-in-class electrodes reduce motion artifact associated with movement of the leadwires on electrode snaps. Repositionable, disposable patient kits can be used for up to 5-days.
Quick Patient Hookup
![](/globalassets/globalpics/claravue/connectors.png)
Patented quick connection point, repositionable and comfortable
CLARAVUE’S patented quick connection consolidates standard 10 leadwire ends to two simple, plug-style connections. Reduce opportunities for error by simplifying connections. Lightweight and conforming cables increase patient comfort.
The CLARAVUE® System
The CLARAVUE® system combines prewired, single-use, radiolucent ECG electrodes with our patented Integral Process trunk cables — consolidating leadwire sets into two combined connections with standardized compatibility to all monitors.
Multi-Parameter CLARAVUE® System
Compatible cables include a quick connect adapter, customizable to a variety of other equipment. Contact us for further information on simplifying your procedure setup using CLARAVUE®.
CLARAVUE Packaging
CLARAVUE comes packaged in a dispenser case designed for easy storage and efficient product retrieval. Each patient kit is a single-use pack, containing all prewired electrodes.
![Claravue Box Packaging](/globalassets/globalpics/claravue/claravue-box.jpg)
![Claravue Pouch Packaging](/globalassets/globalpics/claravue/claravue-pouchmockup-01.png)
Instructions For Use
![](/globalassets/globalpics/claravue/prep.jpg)
Prep
Standard protocol for skin prep applies.
![](/globalassets/globalpics/claravue/open.jpg)
Open
Open the single CLARAVUE patient kit. Remove inner bag. Unwind sets from the holder card.
![](/globalassets/globalpics/claravue/peel.jpg)
Peel
Gently remove electrode sets from release liner by peeling away from thumb tab.
![](/globalassets/globalpics/claravue/apply.jpg)
Apply
Adhere the RA and RL electrode positions to the patient. Continue to apply set A across the patient’s chest to the LA position and down to the LL position. Repeat with set B, applying the V positions from left to right. CLARAVUE is repositionable, allowing the freedom to rearrange on the patient as necessary. Note: Gently pull the wire from the ribbon cable to expand the overall size of the set(s).
![](/globalassets/globalpics/claravue/insert.jpg)
Insert
While holding the male end of the adapter (clear clip) attached to set A, align with the blue, triangular indicator. Press firmly until lever snaps. Repeat with the blue clip attached to set B.
![](/globalassets/globalpics/claravue/weartime.jpg)
5 Day Wear
Ensure a good signal is achieved on the monitor. If a standard three lead trace is necessary, unplug set B from the adapter cable and remove the corresponding V positions from the patient. CLARAVUE’s various lead configurations enables total hospital standardization.